2-Book set

Tables for the Hydraulic Design of Pipes, Sewers and Channels, 8th edition (2 Volume set)

Author(s): HR Wallingford and D H Barr
ISBN: 9780727733856
Publication Date: 07 April 2006
Stock level: Low stock

£161.50

Format:Hardback
Publication status: Published
Publisher:ICE Publishing
Page size:297x210mm
Number of pages:764

For this new edition the system of increments of gradient have been modified to reduce the need for interpolation, now matching that of (Tables D). Continued from the Seventh edition are the results of new work on the assessment of roughness size…



Subjects: Water engineering and wastewater managementHydraulics
Product code: 9780727733856

For this new edition the system of increments of gradient have been modified to reduce the need for interpolation, now matching that of (Tables D). Continued from the Seventh edition are the results of new work on the assessment of roughness size in commercial pipes manufactured from materials currently utilised to give a smooth finish and on the assessment of additional losses at bends in such pipes.

Volume 2 uses a newer, alternative, route to support the application of the unit size method. For this route, Manning equation tables (Tables D) act also as a carrier for obtaining solution of the Colebrook-White Equation when combined with (Tables E). For Volume II of the Seventh edition, the Manning equation tables were redone reducing the increment in gradient between entries to ease interpolation. This is continued here. As before the coverage of discharges continues into the order of scale of continental rivers. In Volume II a wide range of conduit and channel shapes is covered by tables of properties based on unit size, with key examples of these tables also included in Volume I. This gives illustration of solutions supported by the established form of Colebrook-White tables, as is possible for most conduits and smaller channels when the two volumes are used in conjunction.

In both volumes the tables of unit properties provide aid for both gradually varied and rapidly varied flow problems. Also, there is more detailed coverage of the possible effects of variation in water temperature within the normal water resources and drainage range of temperatures. Both volumes include a revised treatment of part-full flow in circular pipes and of the assessment of the effect of conduit shape on free-surface flow in general.

Complete series (2 books)

Tables for the Hydraulic Design of Pipes, Sewers and Channels, 8th edition (2 Volume set)

Author(s): HR Wallingford and D H Barr
ISBN: 9780727733856
£161.50

For this new edition the system of increments of gradient have been modified to reduce the need for interpolation, now matching that of (Tables D). Continued from the Seventh edition are the results of new work on…

1

Tables for the Hydraulic Design of Pipes Sewers and Channels: 8th edition (volume 1)

Author(s): HR Wallingford and D I H Barr
ISBN: 9780727733559
£101.50

This book is the first of two self-supporting volumes that make up the 8th edition of Tables for the Hydraulic Design of Pipes, Sewers and Channels. It presents Tables A to provide a comprehensive range of solutions…

2

Tables for the Hydraulic Design of Pipes, Sewers and Channels: 8th edition (Volume 2)

Author(s): HR Wallingford and D I H Barr
ISBN: 9780727733566
£95.25

This book is the second of two self-supporting volumes that make up the 8th edition of Tables for the Hydraulic Design of Pipes, Sewers and Channels. It provides an alternative solution system for the Colebrook-White…